OEM Amerex 817, 01089

The Amerex 817 (Part Number 01089) is a professional-grade, heavy-duty vehicle and marine bracket specifically engineered to secure 2.5 lb fire extinguishers. In mobile environments—whether on a vibrating construction vehicle, a high-speed service truck, or a marine vessel in rough chop—a standard wall hook is insufficient. The Amerex 817 provides a robust, fail-safe mounting solution that keeps your life-safety equipment locked in place, preventing accidental discharge or physical damage during transit.

Designed by Amerex to meet the rigorous demands of the transportation and maritime industries, this bracket features a high-tension clamp and a quick-release lever. This dual-action design ensures that while the extinguisher is "locked" against the forces of gravity and inertia, it can be deployed in seconds by an operator during a fire emergency. This is an essential component for any facility manager or fleet owner looking to meet DOT (Department of Transportation) or USCG (United States Coast Guard) mounting requirements.

Why Secure Mounting is a Life-Safety Requirement

• Vibration Resistance: Constant vibration from diesel engines or nautical movement can cause a fire extinguisher's pressure gauge to fail or the internal agent to "pack" down. The Amerex 817 uses a snug-fit cradle that dampens these vibrations, extending the service life of your extinguisher.
• Impact Safety: In the event of a vehicle collision or a sudden stop, an un-secured 5-pound object (the weight of a full 2.5 lb unit) can become a lethal projectile. The 817 bracket is designed to withstand multiple "G-forces," ensuring the extinguisher stays attached to the vehicle's frame.
• Mandatory USCG Compliance: For marine vessels, an extinguisher is not considered "approved" by the Coast Guard unless it is secured in a bracket specifically designed for marine use. The Amerex 817 fulfills this requirement for all compatible 2.5 lb models.

The Amerex Engineering Advantage: Built for the Road and Sea

• High-Tensile Steel Construction: The 817 is manufactured from heavy-gauge steel, finished with a corrosion-resistant black powder coating. This ensures the bracket will not rust in humid marine air or become brittle in the extreme heat of a truck cab.
• Adjustable Tension Latch: The metal strap features a precision-engineered latch that "clicks" into place, providing audible and tactile confirmation that the extinguisher is secure.
• Uni-Base Mounting Hole Pattern: The bracket base features multiple pre-drilled holes, allowing for versatile installation on roll bars, bulkhead walls, or inside vehicle toolboxes without the need for custom fabrication.
• OEM Compatibility Guarantee: Because this is a genuine Amerex part, the radius of the cradle is perfectly matched to the diameter of Amerex 2.5 lb cylinders (B417, B403, etc.), preventing the "sliding" common with generic brackets.

The Amerex 817 is the specified choice for high-movement environments:

• Commercial Service Fleets: Essential for HVAC, plumbing, and electrical vans where extinguishers are often mounted near the rear doors.
• Marine Vessels: Ideal for jet skis, small fishing boats, and pleasure craft where space is tight and movement is constant.
• Forklifts & Material Handling: Rugged enough to be mounted on the ROPS (Roll-Over Protection System) of industrial equipment.
• Off-Road & Adventure Vehicles: A favorite for the 4x4 and Overlanding community, where trail vibrations would break standard plastic brackets.
• Public Transportation: Used in paratransit vans and small buses to meet safety regulations for passenger-carrying vehicles.

To ensure your facility or fleet remains compliant with NFPA 10 and OSHA standards, follow these mounting guidelines:

• Height Requirements: When mounted in a building (e.g., a forklift charging station), the bracket should be positioned so the top of the extinguisher is no more than 5 feet from the floor.
• Orientation: While the 817 can hold an extinguisher horizontally, it is best practice to mount it vertically to ensure the dry chemical agent doesn't settle against the valve seals over time.
• Mounting Hardware: Always use Grade 5 or higher bolts when attaching the 817 to a vehicle frame. Standard wood screws are insufficient for the kinetic loads experienced during a vehicle accident.
• Accessibility: Ensure the quick-release latch is facing outward and is not obstructed by other gear, allowing for a "one-motion" retrieval.

Will this bracket fit other brands of extinguishers?
While the 817 is designed specifically for Amerex 2.5 lb cylinders (approx. 3-inch diameter), it may fit other brands with identical dimensions. However, for guaranteed safety and USCG compliance, we recommend using it only with the listed Amerex models.

Is this bracket rust-proof?
The 817 features a high-quality powder-coated finish designed to resist corrosion. However, for boats used in saltwater environments, we recommend a periodic wipe-down with a silicone-based protectant to ensure the metal latch continues to operate smoothly.

Do I need this for my home or office?
For stationary walls in a home or office, a standard "Wall Hook" is usually sufficient. This heavy-duty 817 bracket is specifically designed for environments where movement and vibration occur. If you are mounting an extinguisher in a workshop near heavy machinery, the 817 is an excellent upgrade for added security.