Amerex Footstand for Stainless Steel Fire Extinguishers, Black, with Hose Clip, OEM- 03576

The Amerex 03576 Footstand is designed to protect stainless steel extinguishers -- such as the K-Class (B260/B262) and Water Mist (B270/B272) units -- from the floor-level hazards of demanding commercial environments. Constructed from heavy-duty, impact-resistant polymer, the 03576 provides a stable, non-slip base and integrates a molded-in hose retention clip that eliminates hose dangle and nozzle contamination.

In healthcare, hospitality, and high-tech facilities, extinguishers face constant exposure to caustic cleaning agents, moisture, and impact from utility carts. The 03576 acts as a sacrificial floor-level barrier, keeping the high-polished steel cylinder free of the scratches and dents that can lead to crevice corrosion or structural weakening over a 12-year service life.

Impact Absorption

The footstand is molded from a high-density, UV-stabilized polymer chosen for its elastic properties, which allow the base to absorb the kinetic energy of a hard landing when a technician sets the unit down. This prevents force from transmitting to the welded bottom seam of the cylinder, preserving pressure-vessel integrity.

Crevice Corrosion Mitigation

Stainless steel is susceptible to pitting and localized oxidation when moisture is trapped between the cylinder and a flat floor. The 03576 features internal drainage channels and stand-off ribs that allow airflow beneath the tank, enabling spilled liquids and cleaning chemicals to evaporate rather than pool against the cylinder base.

Integrated Hose Management

The molded-in hose retention clip holds the discharge hose flush against the cylinder body, eliminating the tripping hazard of a dangling hose in tight commercial hallways and preventing the nozzle from contacting floor-level debris. Hose clip condition is a mandatory check during annual NFPA 10 walkthroughs.

The Amerex 03576 is the designated standard for the following stainless steel Amerex units, providing a precision friction-fit interface for each:

Part number for individual units: 03576-P001.

Snap-Fit Verification

Ensure the cylinder base is free of dirt or grease before installation. Align the stand and press it onto the cylinder bottom. A properly installed footstand should not rotate easily or fall off when the unit is lifted by the handle.

Annual Hose-Clip Audit

During the annual inspection, verify the tension of the hose retention clip. If the plastic has fatigued and no longer holds the hose securely, the footstand must be replaced to prevent a tripping hazard citation under NFPA 10.

Hydrostatic Service Removal

During the 5-year or 12-year hydrostatic test, the footstand must be removed. This is the ideal time to clean the cylinder bottom seat and inspect for any signs of pitting before reinstalling or replacing the footstand.

Can I use this footstand on a 10 lb. ABC dry chemical extinguisher?

Generally no. Most dry chemical cylinders use a 5-inch or 5.25-inch shell diameter, while the 03576 is specifically sized for the 7-inch diameter shells used in the Amerex stainless steel line. An oversized footstand will result in an unstable base, which is an NFPA 10 mounting violation.

Does the hose clip fit all nozzle styles?

The hose retention clip is designed to capture the hose body rather than the nozzle tip itself, making it compatible with wide-spray K-class nozzles, water mist nozzles, and standard straight-stream water nozzles.

Should I use adhesive to keep the footstand on?

In most cases the friction fit is sufficient. However, in high-vibration environments some technicians apply a small bead of industrial silicone to the internal rim of the 03576-P001 to ensure the base stays permanently attached during transport.