Amerex Loop and Screw Wall Bracket Assembly (6 Pack), OEM - 15363
Are you a fire protection company? Get wholesale pricing at HedrickPro
Wholesale PricingThe Amerex 15363-P006 Loop and Screw Wall Bracket Assembly (6 Pack) is the OEM wall mounting solution for 10 lb. and 13 lb. Amerex fire extinguishers. This complete fire extinguisher wall bracket assembly includes both the wall-mounted hook and the cylinder-side screw loop, providing a matched pair that ensures secure, NFPA 10 compliant mounting. Compatible models include the B441 ABC Dry Chemical 10 lb., B460 Purple-K Dry Chemical 10 lb., 720 ABC High-Flow Dry Chemical 10 lb., 722 Purple-K High-Flow Dry Chemical 10 lb., and B371 Halon 1211 13 lb. extinguishers.
The 6-pack format is ideal for facility managers and fire protection contractors who need to outfit multiple locations in a single order. Whether equipping a commercial office building, school, or retail environment with wall mounted fire extinguisher stations, the 15363-P006 ensures every unit is mounted with factory-matched hardware that won't loosen, corrode, or cause inspection deficiencies over time.
Using genuine Amerex fire extinguisher mounting hardware is a NFPA 10 requirement — the bracket must be rated for the specific unit it supports. Non-OEM hooks and loops may appear to fit but lack the tested load rating required for 10-13 lb. units, particularly important in high-vibration environments. The 15363 is a staple item on the fire extinguisher parts and supplies inventory for any shop managing Amerex 10 lb. ABC and Purple-K fleets.
| Feature | Details |
|---|---|
| Manufacturer | Amerex Corporation |
| Part Number | 15363-P006 (6 Pack) |
| Compatible Models | B441 (10 lb. ABC), B460 (10 lb. Purple-K), 720, 722, B371 (13 lb. Halon) |
| Includes | Wall hook and cylinder screw loop (matched pair) |
| Application | 10 lb. and 13 lb. Amerex extinguisher wall mounting |
| Certifications | UL Listed, OEM Original |
Mounting Height Requirements
Under NFPA 10, fire extinguishers with a gross weight of 40 lbs. or less must be mounted so the top of the unit is no higher than 5 feet from the floor. The 10 lb. and 13 lb. units supported by the 15363 fall well within this range. Verify mounting height during installation and document on the fire extinguisher inspection record tag.
Wall Substrate Requirements
The wall-side hook of the 15363 must be anchored into structural substrate — wood studs, masonry, or metal framing. Drywall anchors alone are not sufficient for fire extinguisher wall bracket installations under NFPA 10. Use fasteners rated for the gross weight of the fully charged extinguisher with a minimum 4:1 safety factor.
Annual Inspection Checklist
During each fire extinguisher inspection, verify the wall hook is secure and shows no signs of corrosion or fatigue, the screw loop is tight on the cylinder neck, and the unit hangs vertically without tilt. A tilted or loose fire extinguisher mounting bracket is a deficiency requiring immediate correction.
Is this compatible with 20 lb. Amerex extinguishers?
No. The 15363 is sized and rated for 10 lb. and 13 lb. Amerex models only. For 20 lb. units, a heavier-duty fire extinguisher wall bracket rated for the larger cylinder diameter and gross weight is required. Always match the bracket to the specific extinguisher model using the Amerex fire extinguisher parts list.
Does the 6-pack include both the hook and the loop?
Yes. Each unit in the 15363-P006 6-pack is a complete matched assembly including the wall-side hook and the cylinder-side screw loop. Six complete fire extinguisher mounting hardware sets are included per package.
Can I use these brackets for extinguishers from other manufacturers?
The 15363 is specifically designed for Amerex cylinder neck dimensions. While it may physically fit other brands, using it on non-Amerex units is not recommended as the fit and load rating may not be appropriate. Always use manufacturer-specified mounting hardware to maintain compliance.
Best Sellers
