Pyro-Chem P-Clips for Flexible Conduit (Single) 436150-P001

The Pyro-Chem P-Clip (P/N 436150-P001) is a single OEM mounting clip used to secure the flexible conduit in a Pyro-Chem Kitchen Knight II Restaurant Fire Suppression System. Flexible conduit is the alternative to standard 1/2 inch EMT conduit for routing the detection cable through a kitchen suppression system, allowing the cable run to be routed over, under, and around obstacles more easily than rigid conduit permits.

P-clips are the fasteners that anchor the flexible conduit to walls, hood surfaces, and structural members along the cable route. Without secure clips at appropriate intervals, the conduit can sag, shift, or become vulnerable to physical damage from kitchen activity, all of which can affect the cable tension inside and the reliability of the detection system over time. This single-clip listing is suited to replacing a damaged or missing clip at a specific location, or for small supplemental installs where only a handful of clips are needed. For larger installs or full restocks, the 50-pack version (436150) is more economical.

Kitchen suppression systems are pre-engineered systems under NFPA 17A. Any modification to or replacement of conduit hardware must be performed by a certified Pyro-Chem distributor.

• Clip Spacing: The Kitchen Knight II system manual specifies appropriate support intervals for flexible conduit. Clips must be installed at the correct spacing to keep the conduit properly supported and free from movement or sagging.
• Semiannual Professional Service: A qualified technician checks conduit runs including P-clips for looseness, damage, or corrosion as part of required semiannual service, replacing any clips that no longer hold the conduit securely.
• Post-Repair Verification: After replacing a clip, the conduit must be confirmed secure and the detection cable tension verified through the full run before the system is returned to service.

Can I use a generic P-clip from a hardware store instead?

No. This is an OEM component for a certified fire suppression system. Generic clips may differ in dimensions or material properties, and substituting non-OEM hardware on a certified system can affect the system's UL listing.

When should I buy a single clip versus the 50-pack?

The single-clip listing is for replacing a damaged or missing clip at one location. If you are restocking for a full kitchen installation or maintaining multiple systems, the 50-pack (P/N 436150) is the more cost-effective option.

Does this work with rigid EMT conduit as well?

This P-clip is specific to the flexible conduit used in the Kitchen Knight II system. Rigid EMT conduit installations use different fastening hardware appropriate for that conduit type. Your certified Pyro-Chem distributor can confirm the correct clip for your specific installation.