Victory "A" Style Bracket for 10# Extinguishers w/ 5.5" Dia. Cylinders - 070100015
The Victory 070100015 is a professional-grade "A" style wall hook specifically engineered for 10 lb. fire extinguishers. Unlike universal brackets that suffer from handle slop, the 070100015 is precision-contoured to accommodate the 5.5-inch cylinder diameter common to Victory 10 lb. units and Ansul Sentry A10H bracket applications. Constructed from heavy-duty formed steel and finished with a corrosion-resistant black powder coat, this bracket provides the structural integrity needed to support a gross weight of approximately 18 to 20 lbs.
The hook-and-eye interface keeps the extinguisher vertical and stable while allowing for intuitive one-motion removal during an emergency. This makes it the definitive choice for commercial offices, educational institutions, and high-traffic retail environments where NFPA 10 "readily accessible" mounting standards are mandatory. Proper diameter matching also prevents accidental valve damage caused by improper seating on undersized hangers.
| Feature | Details |
|---|---|
| Part Number | 070100015 |
| Bracket Style | "A" Style Wall Hook |
| Shell Compatibility | 5.5-inch shell diameter |
| Weight Rating | Optimized for approximately 20 lbs |
| Material | Heavy-duty formed steel |
| Finish | Corrosion-resistant black powder coat |
| Primary Application | 10 lb. extinguisher wall mount |
| Certifications | UL Listed |
Can I use the 070100015 for my 10 lb. CO2 extinguisher?
No. While the weights are comparable, 10 lb. CO2 cylinders typically have a much wider diameter of approximately 7 inches compared to the 5.5-inch shell of a dry chemical unit. Attempting to use a CO2 cylinder with this bracket will prevent the valve from seating correctly and may result in a cylinder fall. Always match the bracket to the shell diameter stamped on the nameplate.
Why choose this over a standard 10 lb. bracket?
Many 10 lb. units use a narrower 5-inch shell. The 070100015 is specifically calibrated for the larger 5.5-inch shell diameter found on Ansul and Victory hardware. Using a smaller bracket for a 5.5-inch unit creates an insecure seat, which is a common citation during NFPA 10 inspections.
Does this bracket require a locking strap for vehicle use?
The 070100015 is designed for stationary building installations only. For vehicle, marine, or high-vibration environments, a heavy-duty bracket with an over-center metal strap must be used to ensure the unit remains locked in place during transport.
Best Sellers
