Victory "F" Style Heavy Duty Bracket for 20LB C02 / 8" Dia. Cylinders - 070100022

The Victory "F" Style Heavy Duty Bracket (P/N 070100022) is the industrial-grade structural anchor for 20 lb. Carbon Dioxide (CO2) fire extinguishers. Designed to manage the significant static and dynamic loads of an 8-inch diameter high-pressure cylinder, the 070100022 is functionally equivalent to the Amerex 811 bracket and provides a wrap-around mechanical grip that prevents the extinguisher from shifting, tilting, or falling.

Standard J-hooks are insufficient for high-pressure CO2 cylinders, which carry a much higher gross weight than comparably sized dry chemical units. This bracket is engineered to withstand the high vibration levels common in marine engine rooms, industrial manufacturing plants, and heavy vehicle cabs, making it a reliable mounting solution wherever NFPA 10 compliant hardware is required.

Static Weight Management

A fully charged 20 lb. CO2 unit has a gross weight approaching 50 lbs. The formed heavy-duty steel backplate of the 070100022 distributes this constant load across multiple fastener points, preventing the bracket from tearing out of the wall or vehicle surface over time.

Vibration Dampening and Kinetic Grip

In marine and heavy vehicle applications, extinguishers are subject to constant oscillation. The F-style design features a locking mechanical clasp that provides a 360-degree grip on the 8-inch cylinder shell, preventing rattling that could cause structural fatigue of the bracket or accidental discharge due to handle wear.

Corrosion-Resistant Finish

The 070100022 is finished with a durable black protective coating formulated to resist aerosolized salts and high humidity found in coastal and maritime environments, ensuring the rapid-release locking mechanism remains fluid and responsive throughout the bracket's service life.

Fastener Selection

The 070100022 does not include mounting hardware, as fasteners must be matched to the substrate. Use high-tensile fasteners (lag bolts or through-bolts) rated to support the 50 lb. static load plus the dynamic force of a person pulling the unit from the bracket.

Pivot Point Lubrication

In salt-air and marine environments, apply a light coating of silicone lubricant to the pivot points and locking clasp. This prevents oxidation from seizing the release mechanism and ensures the bracket remains ready for deployment at all times.

Vertical Alignment Audit

During each annual inspection, verify the bracket remains perfectly vertical. A tilted bracket places asymmetric stress on the bracket arms, which can lead to metal fatigue over time and compromise the integrity of the mount.

Mechanical Tension Check

Test the rapid-release locking mechanism for proper snap tension at each inspection. If the clasp becomes loose or fails to lock securely, replace the bracket immediately to prevent a falling cylinder hazard.

Can I use this bracket for a 20 lb. dry chemical unit?

Generally no. While the weights are similar, 20 lb. dry chemical cylinders typically have a narrower diameter of approximately 7 inches compared to the 8-inch shell of a CO2 unit. A 1-inch diameter discrepancy creates a loose fit that allows the cylinder to oscillate, which is a major safety violation in any mounting application.

Is this bracket suitable for marine or outdoor use?

Yes. The formed heavy-duty steel construction and durable black protective coating are designed to withstand industrial and marine environmental stressors. Regular inspection of the locking clasp is required in salt-air environments to ensure the release mechanism remains fully operational.

Does the 070100022 include mounting hardware?

No. Because the required fasteners depend on the mounting substrate (masonry, wood, or metal), hardware is sold separately. Ensure all fasteners are rated for the total gross weight of the 20 lb. CO2 cylinder to maintain NFPA 10 compliant mounting.