Victory HD Plastic 10lb Fire Extinguisher Cabinet 25013
Are you a fire protection company? Get wholesale pricing at HedrickPro
Wholesale PricingThe Victory 25013 is a heavy-duty injection-molded plastic cabinet designed to house and protect a standard 10 lb. ABC dry chemical fire extinguisher in indoor and outdoor environments. Unlike carbon steel cabinets where chipped powder coating leads to rust, the 25013's plastic body is inherently inert -- it cannot corrode, making it the preferred choice for chemical warehouses, coastal facilities, and high-moisture wash-down areas.
UV Protection and Impact Resilience
The housing is manufactured with UV-protection additives that prevent the plastic from becoming brittle under prolonged sun exposure, maintaining the safety red finish and structural integrity through years of outdoor installation. The high-impact material also has greater elastic recovery than thin-gauge metal -- if struck by a pallet jack or cart, the cabinet is designed to absorb the impact and return to its original shape rather than denting and trapping the extinguisher inside.
Weather-Proof Seal and Clear Break-Front Cover
A perimeter compression seal protects against rain and wind-driven dust, preventing moisture from migrating into the discharge path and causing agent caking over time. The clear break-front cover eliminates insect nesting and debris accumulation in the discharge horn while allowing fire marshals and technicians to verify the pressure gauge reading and maintenance tag status without breaking the seal. Emergency access requires only a simple pull or break of the visible breakable seal -- no key required.
| Feature | Details |
|---|---|
| Manufacturer | Victory Fire and Gas |
| Part Number | 25013 |
| Material | Injection-molded plastic with UV protection |
| Capacity | Standard 10 lb. fire extinguisher |
| Mounting | Pre-drilled wall mount |
| Color | Safety red |
| Target Agent | 10 lb. ABC dry chemical |
| Environment | Indoor / outdoor (corrosion resistant) |
Mounting Height (NFPA 10)
For extinguishers under 40 lbs., the top of the cabinet must be installed no more than 60 inches above the floor. Position the unit so the pull handle is easily reachable without obstruction.
Fastener Selection
Use fasteners appropriate to the wall substrate. For masonry or industrial steel, use expansion anchors or appropriate masonry screws. The mount must support a gross weight of approximately 18 lbs. under vibrational stress.
Monthly Visual Inspection
Verify the clear cover is free of clouding or cracking that would obscure the pressure gauge. Check that the breakable seal is intact -- a broken seal indicates the unit may have been tampered with or used and requires immediate investigation.
Will this cabinet fit a 10 lb. CO2 extinguisher?
The 25013 is specifically sized for the 10 lb. dry chemical series. CO2 units of the same weight typically have larger discharge horns and different body dimensions. Verify your specific CO2 model's height and diameter against the cabinet's internal dimensions before purchasing.
Does the handle require a key to open?
No. Key-lock cabinets are generally discouraged for life-safety equipment. The 25013 uses a high-visibility pull handle or breakable seal, ensuring instant emergency access while deterring casual tampering.
How do I clean the viewing window?
Use only mild soap and water. Harsh chemical degreasers or solvents will fog the plastic cover, obscuring the pressure gauge and potentially resulting in a deficiency citation during a fire marshal or NFPA 10 inspection.
Best Sellers
